ATP meter with swabs hygiene monitor device atp tester machine EKONATP01

Quick Details

Display: 3.5-inch high-precision graphic touch screen Processor: 32-bit high-speed data processing chip Detection accuracy: 1 × 10-18mol Coliform group: 1-106cfu Detection range: 0 to 9999 RLUs Detection time: 15 seconds Detection interference: ± 5 ﹪ or ± 5 RLUs

Specifications

Atp tester machine EKONATP01 characteristics:

Practicability —— The upper and lower limits can be set according to the requirements of environmental testing, so that data can be quickly evaluated and warned, and surface cleanliness can be quickly screened. High sensitivity-10-15 ～ 10-18 mol Fast speed-the conventional cultivation method is more than 18-24h, while ATP only needs more than ten seconds.

Feasibility-The number of microorganisms has a clear correlation with the ATP contained in the microorganisms. By detecting the ATP content, the number of microorganisms in the reaction can be indirectly obtained Maneuverability-Traditional training methods need to be operated by trained technicians in the laboratory; and ATP rapid cleanliness testing is very simple to operate, and only simple training can be performed by ordinary staff on site. Better experience —— The test tube adopts a plug-in flexible design, which can be cleaned regularly for long-term use and extend the life of the instrument.

Monitor device atp tester machine EKONATP01 main parameters: 1. Display: 3.5-inch high-precision graphic touch screen 2. Processor: 32-bit high-speed data processing chip 3. Detection accuracy: 1 × 10-18mol 4. Coliform group: 1-106cfu 5. Detection range: 0 to 9999 RLUs 6. Detection time: 15 seconds

7. Detection interference: ± 5 ﹪ or ± 5 RLUs 8. Operating temperature range: 5 ℃ to 40 ℃ 9. Operating humidity range: 20-85 ﹪ 10. ATP recovery rate: 90-110% 11. Detection mode: RLU, coliform screening 12, 50 user ID settings 13. The number of result limits that can be set: 251 14. Automatically judge pass and fail 15. Automatic statistical pass rate 16. Built-in self-calibration light source

17. 30 seconds self-test after booting 18. Equipped with mini USB interface, you can upload the results to PC 19. Equipped with special software driver U disk instead of traditional CD 20. Instrument size (W × H × D): 188 mm × 77mm × 37mm 21. Use rechargeable lithium battery to avoid battery replacement 22. Standby state (20 ℃): 6 months 23. Stable liquid luciferase 24. Wet integrated collection swab