Digital R&F X-ray machine-EKONRFB
MODEL / EKONRFB6 Operating frequency ≥100kHz; 7 Tube current range; 8 Tube voltage range：.
- 6 Operating frequency ≥100kHz
- 7 Tube current range
- 8 Tube voltage range：
- 7 Anode heat capacity：212kJ(300kHU)
Product Details
Quick Details
Radiography & Fluoroscopy
Power voltage: AC380V±38V
Specifications
Digital R&F X-ray machine-EKONRFB
MSL R&F X ray machine-EKONRFB Technical
MSL Hot X-ray accessories for sale:
Mass production Mobile X-ray machine 3KW 50mA- EKONPX08
Full body radiation protective suit | Radiation proof suit - EKONLS01
X-ray lead gloves | Nuclear gloves - EKONRS04
Discount Medical x-ray film with CE for sale - EKONMF01
Green sensitive x ray film with CE for sale - EKONMF02
X ray lead glass | X ray protection glass - EKONLG01
Lead foil sheet or rolled lead sheet - EKONLS02
Lead leg pads | X ray foot guard - EKONRS02
Cheap X-ray lead glasses for sale - EKONLG02
Hospital or medical rubber sheet - EKONLR01
4 Casters X-ray lead screen - EKONLD02
Developing solution | Film developing liquid - EKONDS01
X-ray intensifying screen - EKONMF04
X ray lead protective aprons-EKONLA04
X-ray film cassette - EKONMF03
MSL TEAM picture
Technical Specifications
Technical parameters from the currently available product information.
| No. | Technical parameters |
| 1 | X-ray generators |
| 1.1 | Radiography & Fluoroscopy |
| 1.2 | Power voltage: AC380V±38V |
| 1.3 | Supply frequency: 50Hz/60Hz±1Hz |
| 1.4 | Power: 50kW |
| 1.5 | Max output power: 50kW |
| 1.6 | Operating frequency ≥100kHz |
| 1.7 | Tube current range |
| Radiography：10mA～630mA | |
| Fluoroscopy：0.2mA～5.0mA | |
| 1.8 | Tube voltage range： |
| Radiography：40～150kV, adjust lenght 1kV | |
| Fluoroscopy：40～125kV, adjust lenght 1kV | |
| 1.9 | Range of exposure duration：0.002s～6.3s （2ms～6300ms） |
| 1.1 | current time：0.1mAs～630mAs |
| 2 | Operations Console |
| 2.1 | Dimension ：1400mm×400mm×115mm |
| 3 | X-ray Pipe sleeve |
| 3.1 | Max tube voltage：150kV |
| 3.2 | Thermal capacity：930 kJ(1300kHU) |
| 3.3 | Inherent filtration：0.7mm AL/75kV |
| 4 | X-ray tube |
| 4.1 | Max tube voltage: 150 kV |
| 4.2 | Max Filament current： 5.3A (Big) /5.4A (small) |
| 4.3 | Bifocal：0.6mm（small focus）/1.2mm（big focus） |
| 4.4 | Anode rated power：32KW（small focus）；77KW（big focus） |
| 4.5 | Target angle：12° |
| 4.6 | Anode rotation speed：2850 rotate/minute |
| 4.7 | Anode heat capacity：212kJ(300kHU) |
| 5 | Beam limiter |
| 5.1 | power supply： 24VAC 4.5A |
| 5.2 | Inherent filtration：1.0mmAL/70kV |
| 5.3 | Additional filtration：0/0.5/1.0/1.5mmAL/70kV（Switch inside the machine) |
| 6 | Diagnostic bed power control cabinet |
| 7 | Photography bed |
| 7.1 | voltage：SimplexAC220V±22V |
| 7.2 | Power frequency：50Hz±1 Hz |
| 7.3 | input power：≤1kVA |
| 7.4 | Panel bed size：Length × width × height=2100×775×635mm |
| 7.5 | Bed mobile performance：Bed lateral movement range： ≥250mm |
| Bed longitudinal movement range： ≥900mm | |
| 8 | X-ray tube assembly |
| 8.1 | Maximum tube voltage：150kV |
| 8.2 | Heat capacity：1100kJ（1540kHU） |
| 8.3 | Inherent filtration：1.0mm Al |
| 8.4 | Total filtration：2.5mm AL |
| 9 | X-ray tube |
| 9.1 | Operating voltage： 40～150kV |
| 9.2 | The maximum filament current： 5.5A |
| 9.3 | Bifocal：1.0mm（Small focus）/2.0mm（Big focus） |
| 9.4 | Anode input power：30KW（Small focus）；50KW（Big focus） |
| 9.5 | Target surface angle：17..5° |
| 9.6 | Anode rotation speed：2800 rev / min |
| 9.7 | Anode heat capacity：140kJ(190kHU) |
| 10 | Beam limiter |
| 10.1 | power supply： 24VAC 4.5A |
| 10.2 | Inherent filtration：1.0mmAL/70kV |
| 10.3 | Additional filtration: 0/0.5/1.0/1.5mmAL/70kV ( switches inside the machine) |
| 11 | Vertical type racks |
| 11.1 | Vertical stroke:the distance between the top edge of film magazine and the ground should not be longer than 800mm, the stroke should no less than 1000mm |
| 11.2 | Film size:the maximum cassette should not be bigger than 35.6cm×43.2cm |
| 11.3 | aluminium base grid) convergence distance f0=180cm, grid ratio r=10, grid density N=40lines/cm |
| 12 | Remote controlled diagnostic bed |
| 12.1 | Supply voltage:single phase AC220V±22V |
| 12.2 | Supply frequency: 50Hz±1 Hz |
| 12.3 | Input power: ≤1kVA |
| 12.4 | Bed panel dimension: 2000×750×835mm |
| 12.5 | Bed surface horizontal movement range: 240mm±10mm |
| 12.6 | Slewing area of the lathe body: 90°～ 0°～ -15° |
| 13 | Image processor |
| 13.1 | Power supply: AC100～240V 50Hz |
| 13.2 | Rated power: 15W |
| 14 | Monochrome monitor |
| 14.1 | Power supply: AC100～240V 50-60Hz 0.5A |
Specifications can vary by configuration. Confirm intended use, final model, and supply details with our product team.
Discuss this product with our team
Share your application, destination, and required configuration for a project-specific response.