Surgery
EKONIS20 Basic Type Infusion Pump | Infusion Pump Manufacturer
MODEL / EKONIS20Information Flow Rate and unit, Preset Volume and unit, Accumulated infusion volume and unit, Finish, Occlusion, Air Bubble, Bed No., AC Power indicator, Battery capacity, Battery charge indicator, IV set, etc.
- l Innovative door-free design for easy operation
- l Anti-bolus system to reduce significantly bolus after occlusion sudden release
- l High speed infusion up to 2000ml/h satisfies special clinical scenario
- l Wireless data transmission with infusion supervision system
PRODUCT OVERVIEW
Product Details
Quick Details
Specifications
EKONIS20 Basic Type Infusion Pump | Infusion Pump Manufacturer
EKONIS20 Basic Type Infusion Pump | Infusion Pump Manufacturer
MSL TEAM picture
Welcome to medicalequipment-msl.com,If you have any demand in ultrasound machine.
TECHNICAL DATA
Technical Specifications
Technical parameters from the currently available product information.
| Features | |||
| l Innovative door-free design for easy operation | |||
| l Middle Detection and Ultrasound Detectors to double guarantee the correct IV set loading | |||
| l Anti-bolus system to reduce significantly bolus after occlusion sudden release | |||
| l Reminder alarm in case of forgetting to start the operation | |||
| l High speed infusion up to 2000ml/h satisfies special clinical scenario | |||
| l Optional drip sensor and fluid heater | |||
| l Wireless data transmission with infusion supervision system | |||
| Features | |||
| l Innovative door-free design for easy operation | |||
| l Middle Detection and Ultrasound Detectors to double guarantee the correct IV set loading | |||
| l Anti-bolus system to reduce significantly bolus after occlusion sudden release | |||
| l Reminder alarm in case of forgetting to start the operation | |||
| l High speed infusion up to 2000ml/h satisfies special clinical scenario | |||
| l Optional drip sensor and fluid heater | |||
| l Wireless data transmission with infusion supervision system | |||
| Technical Specifications |
| Mechanism Peristaltic pump |
| Operating Mode Flow Rate Mode, Drop rate Mode (optional) |
| Preset Volume 1-9999 ml |
| Accumulated Infusion Volume 1-9999 ml |
| Flow Rate Range 1 - 600 ml/h for 600I Infusion Pump |
| Increment 1, 10, 100 (ml/h) |
| Accuracy ± 5% |
| KVO Rate 1 ml/h |
| Bolus Rate 600 ml/h |
| Drop rate range 1 – 400 drop/min with optional Drip Sensor |
| Display |
| Screen 2.7 inch B/W LCD |
| Information Flow Rate and unit, Preset Volume and unit, Accumulated infusion volume and unit, Finish, Occlusion, Air Bubble, Bed No., AC Power indicator, Battery capacity, Battery charge indicator, IV set, etc. |
| Status Indicator Stop, Run, Bolus, KVO |
| Alarm Type |
| Air Bubble, Finish, Occlusion, No AC Power, Low Battery, Battery Empty, Reminder to operate, Errors, Handle opened |
| Air Bubble Level: 1-3 levels adjustable, turn off |
| Occlusion Alarm Pressure Range: 3 levels: 70kPa, 100kPa, 130kPa (±30kPa), Level Low as default |
| Environment |
| Temperature 5 - 40 ℃ for operating, -20 - 50 ℃ for storage |
| Air Pressure 86 - 106 kPa for operating, 50 - 106 kPa for storage |
| Humidity 20 % - 80 % for operating, 10 % - 95 % for storage |
| Others |
| Classification Class II, Type CF |
| Dimension 120 mm(L) × 140 mm(D) × 195 mm(H) |
| Weight Approximately 1.7 kg |
| Power Supply 100 - 240 VAC, 50/60 Hz |
| Waterproof level IP21 |
Specifications can vary by configuration. Confirm intended use, final model, and supply details with our product team.
NEED A CONFIGURATION?
Discuss this product with our team
Share your application, destination, and required configuration for a project-specific response.