Wireless Bluetooth Portable Pulse Oximeter EKONPO-B

Quick Details

Unique software for telemonitoring by transmitting data synchronously via internet

Long time monitoring and sleeping monitoring

Storage/Review trend data up to 3888 groups, data save time interval settable

Audio and visual alarm when parameters exceeded and sensor-off

Specifications

Wireless BlueTooth Portable Pulse Oximeter EKONPO-B

Parameters ：

Three Parameters ： SPO2 、 TEMP and Pulse Rate

Waveforms ：

Waveform: SPO2 waveform-PLETH

Features ：

• Monitoring SPO2, TEMP, PR & PLETH
• 2.8 inch color TFT LCD in real time display, displayable in big font and big screen
• Blue T ooth wireless is very convenient to realize reviewing the measurements in big screen via connecting PC and to upload h istory data to PC for review, printing or storage
• Unique software for telemonitoring by transmitting data synchronously via internet
• Long time monitoring and sleeping monitoring
• Storage/Review trend data up to 3888 groups, data save time interval settable
• Audio and visual alarm when parameters exceeded and sensor-off
• Built-in rechargeable Li-ion battery, up to 15-hour running time
• Battery capacity indicator. Automatic shutdown for power saving

Wireless BlueTooth Portable Pulse Oximeter EKONPO-B

Applications ：

T he oximeter could be applied in the hospital’s operation room, ICU, clinic section office, Out-patient department, sickroom and emergency treatment.

Wireless BlueTooth Portable Pulse Oximeter EKONPO-B

Specifications:

1. General

Monitoring Parameters: SpO2 、 PR 、 PLETH 、 Pulse strength 、 TEMP

Signal sockets ： SpO2 socket 、 TEMP socket 、 USB socket(for charge battery and transmit data)

2. Display screen

Type: 240 × 320 dot matrix color TFT LCD screen

Display area: 4 3 mm× 58 mm

3. Functions

PL ETH: The monitor can display PLETH waveform

Intelligent parameter monitoring screen: The monitor automatically selects the parameter measurements to display according to the probes connected to the monitor.

Audio and visual alarm: The speaker sounds the alarm and the parameter’s measurement will become in red to flash on the screen. Also the same when sensor-off.

Prompting: Icons of battery capacity, pulse sound switch and alarm sound switch.

Power saving: The monitor will automatic shut down to save power. The time is settable.

Trend: Storage/Review trend data up to 3888 groups, data save time being set freely

Data storage: The saved data will never be lost even if the monitor is powered off.

Communication: Transmitting the patient’s trend to a PC for display, observation, saving and printing via USB or Bluetooth wireless

4. Electrical specifications

Working Voltage: D.C. 3.7V/3000mAH

AC power adaptor

Input: AC 100 V ～ 240V, 50/60Hz, 5VA

Output: D.C. 5V

Internal battery

Type: D.C. 3.7V/3000mAH Li-ion rechargeable battery

Run Time: 15-hour continuous operation with a new, fully charged battery (environment temperature is 25℃)

Recharge time: 8 hours

5. Environment

Temperature

Operation: 0 ° C ~ 45 ° C

Transportation and storage: -20 ° C ~ 60 ° C

Humidity

Operation: 15% - 95 %( noncondensing)

Transportation and storage: 10% - 95 % (noncondensing)

Altitude

Operation: 86 KPa ~106 KPa

Transportation and storage: 50KPa~106 KPa

6. Parameter Specifications

SpO2

Patient: Adult, pediatric,neonate

Range: 0% - 100%

Resolution: 1 %

Accuracy: 70% - 99%: ± 2 %

0% - 69%: Unspecified

PR

Range: 0 bpm ~250bpm

Resolution: 1bpm

Accuracy: ± 2bpm

TEMP

Channel: 1

Input: Body surface thermal-sensitive resistor temperature sensor

Range: 0℃ ～ 50℃

Resolution: 0.1℃

Accuracy: ± 0.2℃